Leak detection for Boulder City homes is one of the greatest aspects of plumbing maintenance you can do for your home. When leaks go undetected wood can be destroyed, mold can grow in crawlspaces, and plumbing throughout out the home can be negatively affected. Setting time aside for leak detection is great because it can pinpoint the problem and and provide a solution quicker than a small bucket will fill with lost water.
Sinks
Cabinets beneath kitchen and bathroom sinks are a good place to start. Look for signs of water damage or build up. Mold and mildew are telltale signs of water leaks. Touch the pipes, particularly the areas where they enter the faucet. Run the hot and cold water faucets for a few minutes and repeat the inspection. Finally, fill the sink with water, let it stand a few minutes and open the drain. Now check the drain pipe and the joints that connect it to the sink for leaks.
Dishwashers
Dishwashers can’t easily be checked for leaks without pulling them out from beneath the counter. But you can inspect the water lines that connect the dishwasher to the kitchen sink. For some units, you may be able to shine a flashlight beneath the dishwasher to look for puddles.
Refrigerators
If the refrigerator has an ice making unit in the freezer, locate the water line that feeds the unit. The lines tend to be fragile and can come loose over time. Trace the line back to the source, which is usually the kitchen sink. Inspect the floor around the refrigerator for condensation leaks. Old refrigerators that don’t evaporate condensation can be a major source of water damage.
Toilets
Toilets can leak from the water supply pipes filling the tank and from the seal between the toilet and the waste pipe in the floor. Flush the toilet several times and carefully look for any signs of leaks in the joints of the water supply pipe and the floor around the base of the toilet. Lift the lid off the tank and flush the toilet. When the tank refills, the water should completely shut off. If the flush valve or water control unit is old, corroded, or loose, the water will continue to run. Running water cools the water delivery pipe to the toilet and the tank, which will cause them to collect condensation in humid weather. The condensation will drip and eventually cause water damage to the floor behind the toilet. Bottom line – don’t ignore a running toilet. Have the water control and flush valve fixed or replaced.
Tubs and Showers
Inspect the caulking around the tub or shower. Old, cracked, or missing caulking can allow water to leak into the wall. Water dripping from a leaky faucet or shower head will go down the drain and not cause any damage, but the faucet may also be leaking water behind the tub or shower.
Washing Machines
For washing machines, make sure the hot and cold water hose connections are open and check for leaks. Inspect the floor around the washer for signs of puddles or water damage.
Hot Water Heaters
Finally, inspect the hot water heater for leaks, and the boiler if the house has hot water heating. The first place to look is the floor around the appliance, but also look at the joints where the water pipes connect.
Don’t wait, call Yes! Air Conditioning and Plumbing today to schedule your leak detection visit.
