Posts Tagged ‘Sun City Anthem’

« Older Entries

Henderson Plumbing Tips: How and Why to Recaulk Plumbing Fixtures

Monday, February 13th, 2012

In Henderson you probably don’t pay much attention to the caulking, or plumbing maintenance around your tub and sinks. It is one of those things that is always there, working kind of behind the scenes, that you never seem to notice until something goes wrong.

The thing about caulking, though, is that something can go wrong with it rather quickly. Because of the high frequency of use of tubs and sinks, the caulk that seals the space between the fixture and the wall can deteriorate and crack over time. This can cause gaps in the caulk or cause the fixture to come loose from the wall, which would necessitate more bathroom plumbing.

When this cracking and erosion happens, water from your bath, shower head or faucet can seep in between the fixture and the wall, potentially causing water damage and fostering colonies of mildew and mold.

Cracked caulk is inevitable with daily use, so you don’t need to worry about preventing it. Instead, learn how to properly fix the situation with a fresh caulk job:

  1. Scrape away all the old caulk from around the fixture using a utility knife or putty knife. Take care to remove all the old caulk while also avoiding scratching porcelain fixtures.
  1. With all the caulk gone, clean out the joint thoroughly. This will remove any last traces of caulk, as well as any other dirt or buildup. If you notice mildew or mold, use a chlorine bleach solution to clean the joint before recaulking.
  1. Once the joint is dry, recaulk it using a bead of caulk that is just slightly wider than the joint. This ensures an adequate seal. Wipe any excess away with a rag.
  1. Allow the caulk to dry thoroughly before using the sink or tub. Read the instructions on the caulk for an estimated drying time.

Take note that it is very important to thoroughly remove all the old caulk and clean everywhere along the fixture joint before applying the new caulk. Otherwise, the new caulk will not adhere properly and potentially damaging dirt may get sealed into the joint.

If you followed all the steps carefully, you should have a fresh seal of caulk that will last you another several years!  If you would rather have a professional handle this delicate situation please call Yes! Plumbing.

Tags: , ,
Posted in Bathroom Plumbing, Plumbing, Plumbing Maintenance | Comments Off

Things You CAN do Yourself Around Your MacDonald Ranch Home

Wednesday, February 8th, 2012

If you own a home, there are a lot of fun ways you can stay on top of regular maintenance without spending hundreds or thousands of dollars to hire a contractor. Sure, there are some tasks only a contractor should perform, but there are plenty of others you can take care of with a little spare time on the weekend.

  • Fixing Leaks – Unless it’s in a main water line or in your sewer, you can usually fix a leak or clog in your pipes by yourself. Replacing a faucet, snaking a line, or taking apart a fixture should still be done with the help of manufacturer’s guidelines, but as long as you turn the water supply off correctly, you should be okay taking things apart and making quick repairs.
  • Yard Installations – Short of digging it up (always have it checked for gas and electricity lines), you can do pretty much anything on your own in the yard. This includes composting, landscaping, adding a barbeque pit or upgrading your back porch.
  • Painting – Feel free to paint anything in or around your home without the help of a pro. Just make sure to use proper ventilation and to ensure that you remove any old paint carefully. If you’re not sure about the age of your paint, it should be tested for lead before you chip it clean, especially if you have children.
  • Replace Appliances – Old appliances can be removed and replaced relatively easily as long as you have someone to help you get rid of the old ones. Also, if you have a gas stove or other appliances that run on gas, always have them checked by a professional. Never unplug gas lines without someone there to ensure the gas supply to your home is off.
  • Tiling – Tiling is something anyone can do, but make sure you’re ready for the time commitment. Especially if you plan on putting tiles on a wall, it’s easy to make a mistake and ruin good tiles or good walls. Also, proper sealing around water fixtures like a bathtub or sink is vital. If you’re not sure, call a plumber to help.

There are a lot of ways you can have fun and fix up your house without paying for a professional’s help. But, remember not to take on jobs that are too much for you. If you aren’t sure how to complete a task or you want a second opinion, never be afraid to call Yes! Plumbing for some help. Even if they just check your work, it will save you money and you get the satisfaction of having done the work yourself.

Tags: , ,
Posted in drain and sewer maintenance, Plumbing, water line | Comments Off

Sun City Anthem Plumbing Repair Tip: Warning Signs of Leaking or Broken Pipes

Wednesday, January 18th, 2012

The plumbing system in your Sun City Anthem home consists of an extensive network of pipes and fixtures that can wear down over time, even if they are well-maintained. Your pipes should be inspected at least once a year, particularly in older homes.

Some broken or leaky pipes can be repaired easily, but you may need to replace your pipes. If you have any questions or concerns about your plumbing system, call Yes! Air Conditioning & Plumbing to speak with one of our certified plumbers.

Here are some warning signs of hidden leaks and broken pipes:

Abnormally High Water Bills

Unusual hikes in your water bill could indicate a leak, from broken or corroded pipes.  You should monitor your water bills to help you keep track of abnormal price increases.

Water Pressure

If you notice any sudden drops in water pressure, or if your washing machine or dishwasher takes longer to run through cycles, you could have a large leak in your pipe system. Call a plumber if it continues to be a problem.

Water Discoloration

While it could be sediment or mineral buildup getting through the municipal filtration system, water that contains red flakes or has a bitter taste could potentially indicate corrosion. You should call a professional plumber if this happens. Not only is it a health hazard, but you may need a pipe replacement.

Cast Iron Pipes in Older Homes

If you buy an older home with iron pipes, you should have them inspected by a certified plumber. Home inspectors can give a preliminary inspection, but they are not equipped or trained to provide a comprehensive inspection. Because cast iron pipes are made of rougher material than PVC piping, cast iron pipes tend to get clogged more easily, so you could have a potential disaster on your hands.

A professional plumber can provide a video camera inspection of your pipes to make sure there are no major clogs, root penetration, or corrosion on the inside of the pipe. This is why a professional plumber should handle any of the plumbing repairs in your Sun City Anthem home.

Call Yes! Air Conditioning & Plumbing to handle all of your plumbing installation, repair, or maintenance needs.

Tags: , , , , ,
Posted in Plumbing | Comments Off

A Las Vegas Plumber’s Guide: What Is a Slab Leak and What Damage Can It Cause?

Wednesday, December 7th, 2011

Also known as a foundation leak, slab leaks can cause a serious problem in your Las Vegas home. A typical cause of a slab leak occurs when the foundation for the home is poured. While the cement is still wet and setting, copper pipe is laid in to run wherever it needs to go for the plumbing system of the home. This is a fairly common practice.

The problem occurs when the copper piping is soft. As the cement hardens, any kinks, bends, nicks or other imperfections in the pipe are exacerbated. Over time, these problems can become more and more magnified, eventually resulting in one or more tiny leaks in the pipe. This causes water to leak directly into the concrete foundation.

This causes a number of problems for homeowners, both short-term and long-term. In the short-term, it reduces water pressure and increases water consumption, resulting in higher monthly bills for poorer water delivery. These are inconveniences and annoyances, but nothing compared to the long-term damage that a slab leak can cause.

The moisture in the foundation becomes a breeding ground for mold. This mold can spread throughout the foundation and the house, which is a serious health risk for you and your family. Mold and mildew spores negatively impact air quality and can lead to illness. Plus, the moisture weakens the foundation gradually over time. Eventually, you have a home that is less structurally sound and may succumb to mold, which can cause thousands of dollars to eradicate and repair.

Slab leaks can be repaired, but sometimes after repairing one, another will crop up shortly thereafter. However, they still must be repaired immediately before the problem spreads and becomes too big to handle.

There are a few different methods for repair, including breaking up the foundation with a jackhammer and laying new pipe or lining the existing pipe with epoxy. Consulting with a professional is the best way to figure out which method is right for you.

Common symptoms to detect slab leaks early are reduced water pressure or inexplicably high water bills. If you notice either of these occurring in your home, you may have a slab leak, so call a professional to get it checked out right away before it leads to much bigger problems.

Tags: , , , , ,
Posted in Plumbing | Comments Off

What is the Difference Between Water Filtration and Water Softening? A Question from Las Vegas

Monday, November 21st, 2011

If you’ve ever considered installing a water filtration system for your Las Vegas home, you probably ran across water softening and wondered how this is different than normal filtration. The two are similar in that they improve the quality of your water, protecting both you and your home’s plumbing system. However, filtration and softening are two very different things and you may not need both of them.

Water Softening

Water softening is a process designed to minimize the impact of hard water on your home’s plumbing. Hard water occurs when certain minerals like iron and magnesium are present in high levels in your water supply. The problem occurs when those mineral settle on your fixtures and pipes, leaving behind a residue that builds over time and can block the pipes or ruin the fixtures.

Hard water isn’t generally dangerous to your health, but if it is bad enough, it can result in poor tasting water and will cost you money as it does an increasing volume of damage to the system. To fix the problem, you soften the water with a chemical treatment that keeps the minerals from settling on their way through. They simply go straight through the pipes and fixtures and no damage is done.

Water Filtration

Filtration on the other hand is designed to remove key contaminants from your water – things like sediment, bacteria, mold, nitrates, and arsenic – things that can actually cause harm to you and your family if not properly treated.

While water filtration is not the same as water softening, the two often go hand in hand. Not only does water softening have the potential to add unsafe levels of sodium to your water (which then needs to be removed through filtration), but usually when water is hard, there are other contaminants as well that can cause harm if left unchecked.

The only way to be truly sure of which problem you have and which solutions are best is to have a full test of your water supply done. This will help you determine which of the many water cleaning solutions on the market will be best for your home.

Tags: , , , , ,
Posted in Plumbing | Comments Off

How to Clean Water Spots from a Shower Door: A Guide From Anthem

Wednesday, October 12th, 2011

The relationship between the water and the shower in your Anthem home is a little paradoxical. You use the water in the shower to keep yourself clean, and you can use water to keep your shower (and everything else!) clean, but if left unchecked, the water itself will leave your shower dirty and spotty.

Those spots left on your shower door are mineral deposits from water that has evaporated, leaving its mineral passengers behind. They are especially problematic in areas with harder water. Here is how you can get rid of them.

The Natural Way

It may surprise you to know that with all the chemicals available on the market for cleaning the bathroom, the best remedies for hard water are actually natural ones: lemon juice and vinegar. They are both acidic, so they can dissolve the mineral deposits, and they rinse away clean.

To use lemon juice (or a lemon), apply it to a damp sponge and wipe the door. You can also squirt the lemon juice directly on the door and wipe it with a sponge. Use this technique and let the lemon juice soak in a bit for tougher stains. Your shower will not only be clean, but it will smell like lemons.

Although it doesn’t smell as nice as lemon juice, vinegar also works well. Don’t forget the cleaning power of vinegar and baking soda, which generates a powerful chemical reaction that helps break up tough stains. For water spots, mix up a paste of vinegar and baking soda. Use a small brush, like an old toothbrush, to spread the paste around the edges of the shower door and on any tough stains. Wipe it clean with a damp sponge.

You can also use vinegar or lemon juice weekly to keep tough deposits from building up.

Other Ideas

There are some other methods you can use if the spots are really stubborn. CLR, for example, can break up very stubborn mineral deposits, but it is also toxic, so use it sparingly. Daily shower cleaner sprays work well to stop water spots from forming if used regularly. And if you think you have too much sediment in you water, look into a water treatment system.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

What You Can Do to Prevent Problems in Your Drains: A Tip From MacDonald Ranch

Wednesday, September 28th, 2011

When you look at a drain in your MacDonald Ranch house, it seems fairly simple. You pour things down and they disappear into the ether, never to be seen again. Of course, that logic goes out the window the second the drain starts to backup or overflow. There are things you can do to avoid such problems though and most of the time, they cost nothing and take only a few minutes a week.

Simple Household Drain Maintenance

The first step to avoiding a problem is not putting anything down your drain that might cause said problem in the first place. Specifically, avoid grease, food, or other objects that might build up in your drains if not properly disposed.

Food can be broken down by a garbage disposal or, even better, placed in a compost pile. Grease, however, should never enter your sink at all. Pour all old kitchen grease into a coffee pot or bucket and dispose of it carefully. It can be thrown away in some places, or it can be recycled. Whatever you do, though, don’t pour it down the drain.

Another easy tip to keeping those drains clear is to pour a natural compound down every now and then like dishwashing liquid or vinegar. The key is to do it preventatively.

If you wait until a full blown clog occurs, vinegar may not get the job done and you’ll need to call a plumber who has a snake or other equipment to get the clog out.

Professional Maintenance

While regular flushing of your drain with hot water and vinegar allows you to clear out the vast majority of the stuff that builds up there every week, it’s also a good idea to call a professional for annual maintenance. Such annual maintenance involves visual inspection, professional grade clearing of food and waste products and a full flush. Done properly, this will minimize the cost of future repairs and replacements and keep your plumbing running smoothly for years to come.

Tags: , , ,
Posted in Plumbing | Comments Off

Water-Saving Tips and Tricks From Spanish Trails

Monday, August 1st, 2011

Here are some of our favorite water-saving tips from Spanish trails. They are easy to incorporate into your lifestyle – and can save you hundreds or even thousands of gallons of water a year.

Whole House

  • Check for leaks – you may save thousands of gallons a month! You can find leaks by looking, listening, and monitoring your water bill for unusually high usage. To check for toilet leaks, put food coloring in your tank. If it gets into the bowl without flushing, you have a leak. Don’t forget to look for leaks in your outdoor plumbing too.
  • Know where your master water shut-off valve is located. In the event of a major problem, you’ll save thousands of gallons of water – and maybe your possessions as well.

Outdoors

  • Adjust your sprinklers so that you water only your lawn – not your sidewalk or driveway.
  • Consider adding a patio or “outdoor room” to your home. You’ll have less lawn to water and will add thousands of dollars to your home’s value.
  • Do two chores at once – water the grass by washing your car or your pet on the lawn. Be sure to use natural, biodegradable soaps.
  • Have your plumber re-route your laundry waste water to your lawn (check with local authorities first to be sure this is legal in your town).

In the Bathroom

  • Turn off faucets when you’re not actively using water – such as when you’re lathering your hands, shaving, or brushing your teeth. You’ll save hundreds of gallons each month. New touchless water faucets (or very affordable converters for your existing faucet) make this easy and fun to do, especially for kids.
  • Shorten your shower by only a minute or two, and save 150 gallons of water a month. (You can do this by turning off the shower while you lather your hair.)
  • Replace your old showerhead with a new WaterSense water-saving showerhead. They’re inexpensive and easy to install. You’ll save up to 750 gallons a month (and it’s a great opportunity to get a nice style upgrade too!).
  • Install WaterSense-certified aerators on all your faucets – another inexpensive upgrade that can save hundreds of gallons a month.
  • Insulate hot water pipes so don’t have to run the water as long while you wait for it to heat up.
  • Plug the tub before turning the water on for your bath, then adjust the temperature as the tub fills up.
  • Keep a bucket in the shower to catch water as it heats up. Use this water to flush toilets or water plants.

In the Kitchen and Laundry Room

  • Install a tankless water heater near your kitchen sink so you don’t have to run the water while it warms up.
  • If your dishwasher is new, scrape off excess food, but don’t pre-rinse. Modern dishwashers are built to handle un-rinsed items.
  • Upgrade your old water-cooled refrigerator, air conditioner, or ice-maker to a new air-cooled model for a significant reduction in water use
  • When buying new appliances, look for the EnergyStar label, which guarantees high efficiency. Also, look for models that offer cycle and load size adjustments.
  • Run your dishwasher and clothes washer only when they are full – you can save up to 1,000 gallons a month.

Tags: , , , ,
Posted in Energy Savings | Comments Off

Save Money with Coupons – HVAC and Plumbing

Friday, July 29th, 2011

HVAC and plumbing services are not things that you usually think about using coupons for. After all, you almost never call an HVAC specialist or plumber unless there is an emergency, and that means you probably do not have time to go hunting for a coupon. You are going to go with the person who is able to respond quickly and get the job done fast.

But that does not mean you should have to pay too much for emergency or other HVAC and plumbing services. In fact, if you know where to look, you can find coupons for great deals on anything from annual maintenance to full new system installation. Of course, not all of these deals are that great. But even saving a little on each service will add up over time. Plus, gathering up some coupons ahead of time will make it easier for you to choose a good HVAC service or plumber because you can see which one in your area offers the best deals.

So where do you find these great coupons? Well, a lot of them can actually be tracked down online. A simple search for HVAC or plumbing coupons in your area should turn up quite a few results for services you could use now or in the future. Some of these offer quite substantial savings as well, so even if they are for something you do not need at the moment, take a look at the expiration date. Even if you are not sure you will be able to use the coupon in that space of time, there is certainly no harm in holding onto it just in case.

It is also important to remember that you do not need to stay with the same company that installed your system, for instance, if you can find a coupon for great savings on annual maintenance with someone else. Just about every company in this field is well versed in handling all types of HVAC or plumbing equipment and they can easily take care of a system that another company installed.

Particularly if you are not satisfied with the service that you get from the company you are now using, look around for coupons from someone else. That is a great way to figure out which new company is worth a try.

Tags: , , ,
Posted in Energy Savings | Comments Off

How Can I Fix a Leaky Faucet?

Wednesday, July 6th, 2011

Leaky faucets certainly are not the type of emergency you want to call the plumber for, but they are also pretty inconvenient and annoying. Fortunately, they are often quite easy to fix. The proper procedure for fixing a leak in your faucet will depend on the type of faucet you have, but it is always a relatively simple task.

If you know what type of faucet you have, you are ahead of the game. But if you do not, you will need to take your faucet apart first to see what is going on in there. Especially in older homes, the most common type of faucet is a compression faucet. This means that inside the faucet there is a rubber washer that helps to create the seal when the faucet is tightened.

When faucets like this leak, chances are it is simply because the washer has worn out and needs to be replaced. Before you can start working, you will first need to turn off the flow of water to your sink. There should be a couple of knobs under the sink that allow you to do this. And be sure to cover or plug the drain before you begin so that you do not accidentally drop anything down it as you are working.

Once you have set yourself up, unscrew the faucet handles (or whichever one is leaking) and remove the outer part. At this point, you should be able to see the washer. Simply remove it and replace it with a new one and then put the faucet handle back on and you should be as good as new. These types of washers tend to wear out from time to time, so  you will probably have to do this again in a few years or so.

When you are replacing your washers, though, it is important to remember a couple of things. First, if you are unsure about what type of washer to put in your faucet, take the old one to the store with you and ask a salesperson for help. You want to make sure that the washer you put in is exactly the right fit for your fixture so it is worth taking the extra step to ensure that you have the right piece.

And after you have taken apart the faucet, it is a good idea to check the stem to see if that has worn out and needs to be replaced as well.

Tags: , , ,
Posted in Plumbing | Comments Off

« Older Entries