Posts Tagged ‘Plumbing Repair’

« Older Entries

Las Vegas Plumbing Repair Question: Why Does My Tub Faucet Leak when the Shower Is On?

Monday, April 2nd, 2012

Here is a common and yet seemingly complex Las Vegas plumbing problem for you. You turn on your shower, flip the switch to go from tub faucet to shower head and the tub faucet continues to leak. Not only is it rather irritating, but it draws from the water pressure in the shower head. Let’s take a look at why this happens and how to quickly fix it.

Why the Leak?

There is a valve in your tub’s faucet that diverts water from the tub to the shower head when the switch or lever is pulled to turn on your shower. Because the valve is not a perfect seal, the tub faucet will drip a small amount during a shower. However, if a large amount of water is coming out of the tub faucet and very little is coming from your shower head, it is likely a problem with that valve.

In some cases, the only way to know the root of the problem is to take apart the assembly and check all of the valve parts individually for damage. The specifics of the plumbing repair process will depend largely on the type of shower and diverter valve you have.

 Fixing the Problem

To fix this problem, you can either replace part of or the entire shower diverter valve. Start by removing the faucet and pulling the screw that holds the shower diverter valve in place. Once the screw is removed, take out the rubber washer and replace it. Many times, this is enough to fix the problem.

If it is not, however, you may need to replace the entire shower diverter valve. There are some situations that make it hard to reach the shower diverter valve, such as when you have a shower handle instead of a faucet knob. If this is the case, you may need special tools or professional assistance in removing the knob to access the valve.

If you find that this does not fix the problem or that you are uncomfortable attempting this repair, contact a Las Vegas plumber who is experienced all bathroom plumbing, such as Yes! Air Conditioning & Plumbing!

Tags: , , , ,
Posted in Plumbing | Comments Off

Blue Diamond Plumber’s Tip: Common Toilet Problems

Monday, February 6th, 2012

The toilet is one of our most important parts of your Blue Diamond home’s plumbing. But it also prone to its fair share of problems. Let’s take a look at some common toilet problems and how to fix them.

  1. Running
    Perhaps the most common of toilet annoyances is the constantly running toilet. Not only is the sound irritating, but it can result in high water bills.  Fortunately, it is simple to diagnose and fix. Just look into the tank at the flapper. If it is not seated properly, adjust the chain to give more slack. If that doesn’t solve the problem, the flapper may be worn and need to be replaced.
  1. Slow draining bowl
    Also known as a weak flush, this one is also fairly easy to fix. A weak flush is usually caused by clogged flush holes, which are underneath the rim of the bowl. Clearing the clogs should fix the problem.
  1. Phantom flush
    Although it won’t actually flush, sometimes you may hear the tank spontaneously start to refill as though someone has just flushed. This just means the water is leaking out of the tank, which can usually be fixed with a new flapper, as with problem #1.
  1. Suction sounds
    If you flush the toilet and hear sucking or gurgling sounds emanating from the tub or sink, that usually indicates a clogged vent pipe. Such clogs usually originate in the roof, such as a dead bird falling into vent pipe up there. You may be best served by calling a plumber to fix this one, in order to avoid making the problem larger.
  1. Clogged or overflowing
    Lastly, of course, is the clogged or overflowing toilet. While wearing gloves and holding your nose, use a plunger or pipe snake to clear the drain. If that doesn’t get it done, the clog may be too large to handle without professional equipment, so you had better call a plumber.

If you have a problem with your Blue Diamond home’s plumbing, remember that Yes! Air Conditioning & Plumbing offers 24/7 emergency service!

Tags: , , ,
Posted in drain and sewer maintenance, Plumbing, Plumbing Maintenance | Comments Off

Kitchen Plumbing Advice from Top Sun City Summerlin Plumbers

Wednesday, January 25th, 2012

Considering how often we use our kitchen sink – i.e., many times per day, every day – and all the grimy business that it usually has to put up with, it’s kind of amazing that we don’t all experience headaches with our kitchen plumbing once a week. Chalk that up to the marvels of modern engineering and design.

That does not mean that kitchen plumbing is perfect, though, and all Sun City Summerlin homeowners face problems with their kitchen plumbing from time to time. Fortunately, many such problems are fairly common and routine and therefore are easily remedied.

Below are 3 common kitchen plumbing problems and some possible solutions for each:

  1. Clogged drain
    Probably the most commonly aggravating of all kitchen sink problems is the clogged drain. If you have never had to deal with one, first thank your lucky stars and then brace for impact, because you’ll probably have to soon. This is usually caused by some piece of food or other deposit obstructing the sink. Try plunging it out, or breaking it up by pouring boiling water or white vinegar down the drain. This may take several attempts. If none of that works, you can resort to a commercial drain opening product.
  2. Leaky faucet
    Got a dripping sound keeping you up at night? Often, leaky faucets are caused by an obstructed aerator, which is that little screen thing on the end of your faucet. Unscrew that, clean it with water and put it back on. If the faucet still leaks, there may be a loose fitting somewhere further down the line, in which case you may need to call in a plumber. (Bonus tip: To quiet the dripping noise until the leak is fixed, tie a length of string to the end of the faucet. The water will run down the string silently instead of clanging into the basin all night.)
  3. Garbage disposal won’t run
    The quickest and most common solution to this problem is the reset the garbage disposal by pressing the button on the unit under the sink.

If these tips don’t work to solve your kitchen plumbing conundrum, then it is probably best to call in a professional. Plumbing is a tricky thing – and garbage disposals can be dangerous – so sometimes it is best to leave it to the pros.

Tags: , , , ,
Posted in Plumbing, Plumbing Advice, Plumbing Maintenance, Yes! Plumbing | Comments Off

Sun City Anthem Plumbing Repair Tip: Warning Signs of Leaking or Broken Pipes

Wednesday, January 18th, 2012

The plumbing system in your Sun City Anthem home consists of an extensive network of pipes and fixtures that can wear down over time, even if they are well-maintained. Your pipes should be inspected at least once a year, particularly in older homes.

Some broken or leaky pipes can be repaired easily, but you may need to replace your pipes. If you have any questions or concerns about your plumbing system, call Yes! Air Conditioning & Plumbing to speak with one of our certified plumbers.

Here are some warning signs of hidden leaks and broken pipes:

Abnormally High Water Bills

Unusual hikes in your water bill could indicate a leak, from broken or corroded pipes.  You should monitor your water bills to help you keep track of abnormal price increases.

Water Pressure

If you notice any sudden drops in water pressure, or if your washing machine or dishwasher takes longer to run through cycles, you could have a large leak in your pipe system. Call a plumber if it continues to be a problem.

Water Discoloration

While it could be sediment or mineral buildup getting through the municipal filtration system, water that contains red flakes or has a bitter taste could potentially indicate corrosion. You should call a professional plumber if this happens. Not only is it a health hazard, but you may need a pipe replacement.

Cast Iron Pipes in Older Homes

If you buy an older home with iron pipes, you should have them inspected by a certified plumber. Home inspectors can give a preliminary inspection, but they are not equipped or trained to provide a comprehensive inspection. Because cast iron pipes are made of rougher material than PVC piping, cast iron pipes tend to get clogged more easily, so you could have a potential disaster on your hands.

A professional plumber can provide a video camera inspection of your pipes to make sure there are no major clogs, root penetration, or corrosion on the inside of the pipe. This is why a professional plumber should handle any of the plumbing repairs in your Sun City Anthem home.

Call Yes! Air Conditioning & Plumbing to handle all of your plumbing installation, repair, or maintenance needs.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Anthem Plumber Tip: Plumbing Problems You Can’t Fix Yourself

Monday, December 26th, 2011

While there are some relatively simple plumbing jobs that most Anthem homeowners can handle with ease, there are some plumbing problems that have a significantly higher degree of difficulty.

For these trickier or more extensive jobs, you really need to call in an Anthem professional. What kinds of projects are we talking about here?

Take for example a simple clogged drain. Whether it’s your tub or your kitchen sink, you’ve certainly encountered a clog over the years. Sometimes they are simple and easy to deal with, so you decide to tackle it on your own. First, you pour some commercial chemical drain clearing product down the drain. You let it sit for a while, like the instructions say, then run the water.

No luck—the drain is still clogged.

So, you try a pipe snake. You thread it down into the drain and through the pipe until it hits the clog. Then you pull back and…nothing. So you try again and again, really jamming the snag down in there to make it engage the clog, until…it breaks.

Now you’ve got a clog and a broken pipe snake in there.

So, you try more drain cleaner, but of course it doesn’t work again, and now the harsh chemicals are taking a toll on your pipes. You decide to just take the length of pipe out so you can see the clog, then remove it. Soon, you find yourself in over your head and you’re not sure how to replace the pipe.

Yikes. That’s a mess.

This isn’t to say you should never attempt to a plumbing repair on your own. Sometimes they are simple enough that the DIY option is the cheapest and best. However, if your efforts are coming up short and you’re about to enter unfamiliar territory, call in a pro. It will save time, money and headaches in the long run.

Tags: , , , ,
Posted in Plumbing | Comments Off

Las Vegas Plumber’s Guide: How to Stop a Toilet from Overflowing

Monday, December 19th, 2011

An overflowing toilet is a really unpleasant problem to have in your Las Vegas home, and one you will undoubtedly want to correct right away. Toilets are reliable in that they tend to last a long time and not act up much, but when yours does start to malfunction, you pay attention right away.

To start with, examine the root cause of the overflow problem. There are three major causes of overflow: a clogged or blocked drain that does not allow the toilet to flush properly, an improperly adjusted float that allows the tank to overfill and a blocked vent pipe that replaces the air in the pipe after each flush.

Each of these requires a different course of action, so let’s discuss each individually.

If the drain is blocked, you will probably know right away. For one, water will overflow from the toilet’s bowl rather than the tank. For another, there will probably be quite a mess. Treating this type of overflow problem is straightforward—remove the clog. For simple clogs, a plunger and some elbow grease will get it done. Another trick is to stick the open mouth of an empty two liter bottle into the drain and squeeze. The blast of air can knock the clog free.

If your toilet is clogging and overflowing frequently, however, the problem may not be with the drain or with anything you are doing. It may be that the vent pipe is clogged. A vent pipe moves external into the plumbing system to replace the air that is pumped out with each flush. When it is blocked, the toilet can’t flush properly, which can lead to overflowing. If you have trouble with frequent clogging, call a plumber to inspect the situation.

In both of those situations, the toilet bowl will overflow. Another possibility is that the tank overflows, which is a different kind of problem. This is often cause by the filler float being set too high, so the tank fills with too much water. You can fix this by simply adjusting the mechanism inside the tank that controls the level of the float.

Whether it’s one of these three, or something else entirely, when your toilet overflows, be sure to check it out and get it fixed right away. And if you can’t fix it yourself, call your Las Vegas plumber.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

A Question from North Las Vegas: Why Is My Toilet Dry and How Can I Fix It?

Friday, December 9th, 2011

Under normal circumstances, after you flush your toilet in your North Las Vegas home, the tank and bowl both fill back up with water, preparing it for the next use. The water from the tank is what flushes into the bowl when you push the handle, so if it is not filling properly, then the toilet will be dry.

This problem is troublesome, but not uncommon. It has a number of possible causes and fixes.

The first place to look is the water supply to the tank. If it has been inadvertently turned off, then obviously the tank will not fill. This is akin to the troubleshooting section of your old VCR manual, where it tells you to make sure the power cord is plugged in. It may sound silly, but it never hurts to check the most obvious and easily fixed of the possible causes first.

Another possibility that is very easy to fix is that the ballcock inside the tank has jammed at the top. Inside your toilet tank is a rubberized bulb connected to an arm. This bulb floats in water and controls the intake valve on the toilet tank. So, when the water level reaches a certain depth, the ballcock floats and closes the valve. However, if the ballcock is jammed in an upward position, it would keep the valve closed even if the tank is empty.

In this case, it may just be a matter of pushing the ballcock past the jam and then making sure it moves up and down freely. That alone may fix it.

A third common cause of the dry toilet problem is a clogged intake valve beneath the toilet. These valves can become clogged and then not allow water through, especially in systems with hard water or particularly old pipes.

If this is the problem – or if it is anything besides one of the two simple fixes described above – the best solution is to call a plumber. A professional can correctly identify the source of the problem and perform the necessary repairs. It’s likely not going to be a huge repair, but it’s best to entrust the job to a pro.

Tags: , , , ,
Posted in Plumbing | Comments Off

Why You Might Need Video Inspection for Your Water or Sewer Line? A Guide from Mountains Edge

Friday, December 2nd, 2011

When you suspect a problem in your pipes, the first thing you should do is call a Mountains Edge plumber for an inspection. It could be as simple as a small crack that can be sealed easily or a clog from excess food and grease being put down the drain.

In the past, inspection was a hit or miss process. Using trial and error a plumber would attempt to determine the source of the problem. However, with modern trenchless technology and the low cost of video equipment, it is now possible to look inside the pipe and see what the problem is directly.

How Video Inspection Works

The process varies depending on the length of pipe that needs to be inspected. For instance, for a sewer line or water line, a small hole is dug to access the pipe. However, inside this may not be necessary depending on where your plumber suspects the problem originates.

That said, pipe inspection is most commonly needed for underground lines that cannot be accessed without some digging. Instead of digging up the pipe completely, a video line can be used to check for specific problems.

Once your plumber has access to the pipe line, they will insert the video inspection unit and check for things like roots, clogs, leaks, and cracks. This is such a powerful tool because instead of guessing where the problem is located and repairing based on those assumptions, your plumber can now be 100% sure of the problem and solve it accordingly.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Testimonial: Bob R. & Sherri Q. in Las Vegas

Monday, November 28th, 2011

Bob R. & Sherri Q. from Las Vegas were really happy with their recent plumbing repair, here is what they wrote to us:

I just wanted to thank you for sending a great service specialist Matt Harbison. This is the second time we used your company. The other time was for air conditioning. We are planning to remodel our bathrooms and your name has stayed on the top of our list. Actually now you are the only name on your list because of the professional attitude of Matt and how everyone treated us that we dealt with. You should be proud that we felt like we were getting a small town treatment. Everyone including you phone people were great. We will be happy to tell people about your service.

- Bob R. & Sherri Q. in Las Vegas

Tags: , ,
Posted in Plumbing | Comments Off

How to Shut Off Your Water Supply: A Guide from Mountains Edge

Monday, November 14th, 2011

In the case of a plumbing emergency, the last thing you want to do is watch as more water continues to pour into your Mountains Edge home through a burst pipe, broken appliance or busted water valve. So, the first step should always be to turn off your main water supply valve. Here are some tips for finding that valve and getting the water supply off as soon as possible.

Finding Your Main Water Supply Valve

The valve is almost always located the same place. It is usually in your garage between the inlet and the main water line. Once you find the main water supply valve, turn it off to immediately stop more water from entering your home. If you notice that water is continuing to enter your home, you have a problem before the entry valve and should call the city immediately because one of their pipes might have burst.

Shutting Off Individual Appliances

In many cases, the problem is related to a single appliance. If this is the case, you don’t necessarily need to turn off the entire water supply – just the supply valve for the specific appliance or fixture. Every major water fixture and appliance in your home should have its own shutoff valve in an easy to reach place. This goes for every sink, toilet, shower, dishwasher, and washing machine in your home – not having those valves can be dangerous.

Once you have turned off your water supply, it’s time to call a plumber. Make sure to keep track of everything you do (take notes if you can) and supply that information to the plumber both on the phone and when they arrive. It will help them diagnose and solve the problem much faster.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

« Older Entries