Posts Tagged ‘Plumbing Maintenance’

« Older Entries

North Las Vegas Plumbing Maintenance: Sump Pumps

Monday, January 23rd, 2012

Keeping the sump pump clean in your North Las Vegas home has many benefits. Not only does a clean sump pump run more efficiently, which lowers your energy bills, but it also helps prevent malfunctions. The sump pump in your home pumps out excess groundwater that could potentially flood your basement and cause major water damage and mold growth.

To prevent flood damage in your home, make sure your sump pump well is free of debris and that the pump it is maintained regularly. Call Yes! Air Conditioning & Plumbing any time if you have questions about how to maintain sump pump or to have it professionally cleaned and inspected. Here are some specific reasons why a clean sump pump is important.

Float Switch Malfunctions

Most submerged sump pump models have a floater or similar device that detects the water level inside the well. Once the water table reaches a certain point, the float switch turns the pump on. If debris or dirt gets trapped underneath the switch, it can get stuck in the “on” position, which causes the motor to run constantly and potentially overheat.

Clogged Filters

Most filters in sump pumps are designed to allow smaller particles through, but larger pieces of debris can clog the system and cause it to shut down. An overheated motor or tripped circuit could result from a clogged filter because the motor has to work harder to pump out the water. If you aren’t sure how to check the filter for debris, call a professional plumber for advice.

Preventative Maintenance Tips

Try to keep debris from falling into the well, and clean out any large particles that you can see in the water. Occasionally fill the well all the way with a hose and test the floater switch to make sure it’s working properly. At least once a year, hire a professional plumber to drain your well and clean the inside of the well and the pump. Your North Las Vegas plumber will also inspect the pump to make sure it is in good working condition.

You can help maintain the sump pump in your North Las Vegas home simply by keeping it clean!

Tags: , , , , ,
Posted in Plumbing | Comments Off

How to Clean a Fiberglass Bathtub: A Guide from Las Vegas

Wednesday, November 9th, 2011

Fiberglass bathtubs are very durable, and they have a look that can add a lot to the design of a bathroom in your Las Vegas home. However, they require special care to keep clean and avoid discoloration. The methods and products that work well on porcelain or enamel tubs will not necessarily be successful on fiberglass, and can actually cause permanent damage. Follow these instructions to keep your fiberglass clean and shiny for years to come.

Word of Warning

First of all, never use an abrasive or harsh cleaning product on fiberglass, as it can destroy the finish. When selecting a product to use on your tub, read the indications on the label to make sure it can be used safely and successfully on fiberglass. If you’re in doubt, pass on that product in favor of one of the products mentioned below, as most consumers have found them to be safe for fiberglass.

What to Use

There are a few options for cleaning a fiberglass tub. The simplest is to use something you probably already have around the house– baking soda. You can use a solution of baking soda and water on a wet rag and wipe the tub. This should remove soap scum and other minor stains without damaging the finish. Be sure to rinse thoroughly. You can also take advantage of some elementary chemistry by sprinkling baking soda around the tub, then spraying with white vinegar. The fizzy reaction dissolves stains, and you can just wipe it off with a warm rag or sponge.

Another suggestion is to try oxygen-powered cleansing powders, like OxyClean. Fill the tub with water, add some cleaning powder and let it sit for a bit before draining. You may need to scrub a bit with a plastic brush to get everything loose.

One final suggestion is to try Mr. Clean Magic Eraser or similar product. Although they require some extra elbow grease to really be effective, they are powerful and can remove the tougher stains from fiberglass more easily than you think.

Try one of these strategies or a combination of them to keep your fiberglass tub clean and fresh, which of course helps keep you clean and fresh. And if you have any more questions about how to best maintain your bathroom fixtures, talk to your local plumber.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Easy Drain and Sewer Maintenance: A Tip from Spring Valley

Friday, November 4th, 2011

When it comes to your Spring Valley home’s plumbing, one of the most important things you can do is perform regular drain and sewer maintenance. Those pipes are vital to maintaining a steady flow of waste water out of your home – if something goes wrong, you’ll regret not fixing it earlier. Here are some easy strategies for maintaining your drains and sewer lines:

  • Avoid Unflushable Items – Some items are designed to be flushed down the toilet. Everything else is not. If something isn’t specifically designed to go down your toilet, don’t put it down there. This includes paper towels, napkins, any kind of food, floss, or hair, and anything else that should go in a garbage can. Toilets may seemingly whisk everything away in one flush, but a lot of that stuff can get stuck on its trip to the sewer.
  • Clear Drains Weekly – You can’t clean your sewer line without professional help, but you can do your best to keep drains clear on their way out. Use boiling hot water and lemon juice or a mixture of baking soda and vinegar once a week to clear out the drains of any excess build up. Also, avoid putting any grease or other gunk down the drain that might stick to food particles and clog the drains.
  • Have Slow Drains Inspected – If a drain in your home slows down significantly, have it inspected. It might be a bit of hair stuck in a trap somewhere, or it could be your sewer line starting to clog. It’s better to know now than to wait and fall victim to a much larger problem in weeks or months.
  • Use Drain Strainers – Don’t let anything go directly down the drain. Use strainers to block food, hair or other stuff from getting into the sink or bathtub drains. Hair in particular, when mixed with grease or soap can become a glue-like substance in your drains.

Most drain and sewer maintenance is preventative and common sense. Pay attention to the effects your actions have on the water lines leaving your house and you can greatly reduce the risk that something goes wrong in the future.

Tags: , , , ,
Posted in Plumbing | Comments Off

Why Does My Sink Backup When I Run the Washing Machine? A Question from Summerlin

Wednesday, November 2nd, 2011

Every now and then something strange happens that is simultaneously baffling and frustrating in your Summerlin home. Gray water from your washing machine backing up into your sink is one such problem and for many homeowners it can be an ongoing source of annoyance.

Why does this happen? To start with, know that your sink and washing machine drain lines tend to run congruent to each other. This means they combine at some point on the way to the main sewer line. So, if there is a problem after they combine, it can affect both systems.

How to Fix the Problem

First, you must pinpoint the problem. More often than not, a washing machine backup will occur in one or more sinks during or after the drain cycle of your washing machine. This may not happen every time or it may get progressively worse. It depends on why it is happening in the first place.

If the sink doesn’t back up on its own when you do the dishes or run the faucet, the clog is probably deeper in the pipes and only responds to the large volume of water being drained from your washing machine. In either case, you probably have a clog in the drainage pipe after the two combine.

Do NOT use any chemicals to clear the clog. Not only do chemicals cause damage to your pipes, which can lead to cracks and leaks later, they are not always effective at actually removing the problem – they simply minimize it in the short term.

To solve the problem, you’ll either need to plunge the sink and hopefully clear out the clog or have someone snake the line to pull the clog out of the drain pipe. If you cannot clear it on your own, it may be a good time to call a plumber for a more in-depth attempt to fix the problem.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Happy Halloween!

Monday, October 31st, 2011

Happy Halloween! We hope you all have a great time trick or treating, going to a haunted house, or just dressing up! And don’t forget that Halloween means fall is definitely here; don’t wait to get started on your fall maintenance. Now is the time to clean up your lawn, seal up any leaks, and check your plumbing system. You’ll be glad you did!

Tags: , , , ,
Posted in Holiday | Comments Off

Sump Pump Maintenance in Mountains Edge

Wednesday, October 26th, 2011

A good sump pump is the only thing standing between you and a basement full of water, so it makes sense to implement a good maintenance plan for your pump. A lot of Mountains Edge homeowners don’t even think about their sump pumps, however, probably because they are buried out of sight, but the only way to know for sure that it will work when you need it most is to keep it in good operating condition. Here are some tips to help you do just that:

  • Check the GFCI – Your sump pump should be plugged into a Ground Fault Circuit Interrupter (GFCI). This is a special outlet that keeps the system from getting waterlogged. If it gets damp, it shuts down, turning off your sump pump. Unfortunately, GFCIs can be faulty or break, so check it regularly to make sure it is always on.
  • Upright Operation – If you have a standing sump pump, make sure it stays upright and doesn’t fall over when operating. These things can move a lot and if they do fall over, they may not pump properly.
  • Test it Regularly – Pour water into the sump pit when empty to make sure it will work when needed. Most people who need emergency service could have pinpointed the problem weeks or months earlier if they had known the system was broken.
  • Check the Outlet Pipes – Check the outlet pipes regularly for leaks or damage. If they start leaking back into the foundation, they can cause damage or leakage into the basement.
  • Clean the Grate – Submersible pumps are often left to sit in their pits for months or even years without cleaning. At least once a year, remove the sump pump from its pit and clean away any gunk that’s built up. Stones or debris in the pump can break the motor if left unchecked.

A good sump pump is all that stands between your home and a boat load of water whenever it rains. To keep your home clean and dry, check your pump often and if necessary, call someone for routine maintenance.

Most of the problems that pop up with sump pumps can be avoided entirely if they are maintained on an annual basis. Sometimes you may need to call a professional for advanced cleaning or part replacement. If so, try and do so before the raining season starts.

Tags: , , , , ,
Posted in Plumbing | Comments Off

How to Get Lime Out of Your Pipes (and Your Teapot): A Tip From Summerlin

Monday, October 10th, 2011

Lime deposits are what cause that white, chalky, filmy residue that you see on faucets, shower heads and tiles in your Summerlin home. Aside from being unsightly, lime deposits can also cause damage over time. Lime builds up inside the plumbing of your home, slowly degrading your pipes. Below are some tips to get rid of lime in common trouble spots.

Pipes

Lime most often builds up in pipes that carry hot water, since the water heater dissolves the lime in the water. The lime is then deposited on the inside of the pipes when it cools. Here are some steps to clear out the troublesome lime from those pipes:

  1. Turn off your water heater and drain it so it is about half full.
  2. Remove the pressure valve, being careful to follow the manufacturer’s instructions.
  3. Pour solvent into the heater through the open valve. There are commercial products available specifically designed to break up lime deposits, but white vinegar can be used as a cheaper and greener alternative.
  4. Replace the pressure valve, turn the heater back on and allow it to fill all the way.
  5. Turn on hot water faucets throughout the house. Let the water run until it runs clear or doesn’t smell of vinegar, depending on which solvent you used.

Kettles & Coffeemakers

Mineral deposits in a kettle or coffeemaker can cause your morning beverages to taste bitter. To clean them out, try these techniques:

  • Put 2 tablespoons of water softener in your kettle and fill it with water. Bring to a boil and rinse thoroughly. Alternatively, you can use a 1:1 ratio of vinegar and water, then let it sit overnight after boiling.
  • Fill your coffeemaker’s reservoir with water plus 2 tablespoons of water softener. Or, fill it entirely with white vinegar. Either way, run it through once that way, then a few more times with pure water to rinse.

For more obvious deposits, like faucets and tiles, usually a combination of hot water and either lime remover or white vinegar will do the trick. You can get more instruction on removing lime scale at HowToCleanStuff.net.

Those are the tried-and-true methods for making your pipes last by keeping lime at bay. Some plumbers will swear to you that putting magnets on your pipes will prevent lime from building up. Data to support that is inconclusive at best, although it can’t hurt to try. If you have more questions, contact your local plumber.

Tags: , , ,
Posted in Plumbing | Comments Off

What You Can Do to Prevent Problems in Your Drains: A Tip From MacDonald Ranch

Wednesday, September 28th, 2011

When you look at a drain in your MacDonald Ranch house, it seems fairly simple. You pour things down and they disappear into the ether, never to be seen again. Of course, that logic goes out the window the second the drain starts to backup or overflow. There are things you can do to avoid such problems though and most of the time, they cost nothing and take only a few minutes a week.

Simple Household Drain Maintenance

The first step to avoiding a problem is not putting anything down your drain that might cause said problem in the first place. Specifically, avoid grease, food, or other objects that might build up in your drains if not properly disposed.

Food can be broken down by a garbage disposal or, even better, placed in a compost pile. Grease, however, should never enter your sink at all. Pour all old kitchen grease into a coffee pot or bucket and dispose of it carefully. It can be thrown away in some places, or it can be recycled. Whatever you do, though, don’t pour it down the drain.

Another easy tip to keeping those drains clear is to pour a natural compound down every now and then like dishwashing liquid or vinegar. The key is to do it preventatively.

If you wait until a full blown clog occurs, vinegar may not get the job done and you’ll need to call a plumber who has a snake or other equipment to get the clog out.

Professional Maintenance

While regular flushing of your drain with hot water and vinegar allows you to clear out the vast majority of the stuff that builds up there every week, it’s also a good idea to call a professional for annual maintenance. Such annual maintenance involves visual inspection, professional grade clearing of food and waste products and a full flush. Done properly, this will minimize the cost of future repairs and replacements and keep your plumbing running smoothly for years to come.

Tags: , , ,
Posted in Plumbing | Comments Off

How to Prevent Bathroom Water Damage: A Guide From Spring Valley

Monday, September 26th, 2011

Water damage. Even the mere mention of potential damage from excess water in your Spring Valley house is enough to send a chill down your spine. However, there are a number of things you can do to avoid such damage, especially in the bathroom.

The Bathtub

The biggest single contributors to water damage are the shower and bathtub, where gallons upon gallons of water are distributed every day. You can minimize damage by doing the following:

  • Tiles – Check for missing or cracked tiles and replace them immediately. Supplement the tiles with grout that is properly sealed and check for any potential leaks.
  • Keep it Dry – There is a lot of water in your bathroom. Keep it off the floor by drying it up after a shower, hair washing or any other moisture producing activity in the bathroom. Make sure you minimize the risk of excess water by placing bathmats on the floor outside your shower.

Sinks and Fixtures

  • Check Under the Sink – Look under the sink and make sure there are no drips from the faucet and no leaks from the trap. You may simply need to check and clean the trap once every month or so.
  • Seals – Check sink seals on a regular basis for cracks or leaks and replace them when necessary.
  • Speed of Drainage – If the sink drains slowly, the drain may be clogged. Check the trap and if that doesn’t help, call a plumber.
  • Upgrades – Upgrade your fixtures to save water. Toilets eat water to the tune of 40% of your annual consumption and your shower head can be made almost twice as efficient without cutting into your comfort level. If you notice a drip, crack or leak from any of these devices, simply upgrade them and you’ll save a lot of water (and reduce how much of it could leak if a problem occurs in the future).

There are a lot of ways to avoid water leaks in your bathroom. Keep a close eye on things and it will be much easier than if you waited for a full blown problem to develop.

Tags: , , , ,
Posted in Plumbing | Comments Off

The Do’s and Don’ts of Clogged Drains: A Guide From Mountains Edge

Friday, September 23rd, 2011

Clogged and slow drains can be a real bummer in your Mountains Edge house. Water standing in the kitchen sink is gross, and no one likes to shower with the tub gradually filling around their feet. Calling a plumber when the clog gets out of hand is easy enough, but it’s time consuming. Plus, it means having to do without whatever water source that drain is involved with until a plumber can get there to fix it.

The best solution, then, is to prevent clogs from forming. With proper use, some brief regular maintenance and a few tricks, most clogs can be stopped dead in their tracks before becoming a problem. Follow these guidelines and you may never need to make that emergency plumber call again.

Don’ts

First of all, there are some things you just shouldn’t do to your drains and pipes. These things can quickly lead to clog buildup, so avoid them:

  • Don’t pour liquid grease, such as bacon grease, down drains. It can solidify in the pipes and cause a clog.
  • Don’t flush anything down the toilet that is not designed to be flushed.
  • Avoid using bleach or other chemicals to clean tubs, sinks and drains. Particles from these cleansers can build up to cause clogs, or even erode pipes.

Do’s

Even with best practices, no drain will remain completely clean. However, a little proactivity can stop everyday residue from accumulating and forming a nasty clog. Try some of these maintenance tips to keep things running smoothly:

  • Use a screen, guard or trap. These can catch food, hair and other debris which would otherwise wind up sitting in your pipes.
  • Clean sink and drain stoppers regularly. Debris can get trapped on and under the stoppers, just waiting to break loose and cruise into the drain to cause a clog.
  • A few times a year, stop up your sinks and tub, fill them up all the way, then let them drain. The pressure and volume of the water will help shake loose deposits in the pipes.
  • Once a month or so, carefully pour boiling water down the drain to dislodge stubborn deposits. You can also do this any time you notice a drain is starting to run slow. Vinegar is also effective.

Tags: , , ,
Posted in Plumbing | Comments Off

« Older Entries