Posts Tagged ‘Pahrump’

Value of a Plumbing Maintenance Agreement in Summerlin

Wednesday, September 21st, 2011

Consider for a moment the cost of fixing a leaky pipe or a burst water main in your Summerlin home. Imagine how much money goes down the drain (so to speak) if you don’t have someone on call to come and fix the problem whenever you notice a drippy faucet or see a wet patch on your ceiling. This stuff will add up fast.

That’s why so many plumbers offer extended maintenance agreements to keep your fixtures and pipes on track. In most cases, these maintenance agreements are assigned to specific pieces of equipment such as your water heater, your toilet, your sinks and showers, or your pipes. However, there are many plumbers who offer full coverage of your home for a set annual fee. Let’s take a closer look at what that would do for you.

Full Annual Coverage

If you pay for a full annual maintenance plan for your home, it would cover yearly checkups of the following:

  • Water heaters
  • Incoming water mains
  • Pipe conditions
  • Fixture and drain health
  • Sewer and drain lines

Now, imagine how many years go between checkups of these things normally. When was the last time you had someone visit your home and check your drains for clogs or inspect your water main for stress and wear? Have you ever had it inspected?

Most homeowners forget about their plumbing for years until it needs a repair or replacement, which can cost a lot of money in the long run.

The Annual Savings

For a small investment, you prolong the life of your plumbing by years and the cost of replacement will be negated by having small repairs completed on an annual basis. Simply having a leak patched or a clog cleared costs little compared to the thousands of dollars it will cost to replace something – all fantastic reasons to consider an annual maintenance plan.

Tags: , , ,
Posted in Plumbing | Comments Off

LEED Accreditation – What Is It, and How Can I Get It for My Pahrump Home?

Wednesday, August 17th, 2011

LEED (Leadership in Energy and Environmental Design) is an internationally-recognized green building rating system based on standards developed by the U.S. Green Building Council (USGBC), and you can have your home LEED accredited in Pahrump.

The LEED system is voluntary and offers homebuyers third-party verification that a home is sustainable, water efficient, and energy-saving; is designed to conserve construction materials and reduce pollution; and has clean indoor air.

Homes that are candidates for LEED accreditation are rated on a 100-point scale. The home must satisfy all minimum requirements and earn a minimum number of total points. Key areas of evaluation include:

  • Sustainability of Building Site. The home’s impact on ecosystems and waterways must be minimized, as must erosion, light pollution, and construction-related pollution.
  • Water Efficiency. The home must have water-efficient appliances and fixtures and regionally appropriate landscaping.
  • Energy and Atmosphere. The home must have energy-efficient design, appliances, systems, and lighting. More points are awarded for use of clean and renewable energy and other innovative strategies.
  • Materials and Resources. The home must use sustainable materials, and construction and operating waste must be minimized.
  • Indoor Environmental Quality. The home must have high indoor air quality, good indoor acoustics, and access to natural daylight and views.
  • Locations and Linkages. The LEED standard promotes building in previously-developed, “infill”, or “brownfield” sites and away from undeveloped and/or environmentally-sensitive sites. Points are also awarded for building near existing retail and transit infrastructure and outdoor recreation areas.
  • Awareness and Education. Home builders are encouraged to teach new homeowners about the green features of their home so that they can be maximally utilized.
  • Innovation in Design. Points are awarded for home design that is innovative and goes “above and beyond” existing LEED requirements, and for including a LEED certified professional on the design team.
  • Regional Priority. Bonus points are awarded for taking into account the regional environmental concerns that have been identified by USGBC’s regional councils.

LEED accreditation doesn’t just make sense from an environmental standpoint. It also makes good financial sense:

  • LEED accreditation offers great ROI for new construction – some studies have shown that an upfront investment of 2% in green building design can result in long term savings of 20% on total construction costs.
  • LEED-certified homes generally have lower operating costs.
  • LEED-certified homes are more attractive to buyers and renters (according to studies, commercial LEED-certified buildings have higher occupancy rates, higher rent-per-square foot, and higher per-square-foot sale prices than comparable non-LEED buildings).
  • LEED certification may provide some protection against indoor air quality lawsuits.

LEED accreditation can only be granted to new construction or major remodeling projects. To apply for LEED accreditation, contact a LEED for Homes Provider organization in your area. The LEED for Homes Provider organization will work with your builder to ensure that your home qualifies and will guide you through the accreditation process.

Tags: , , , ,
Posted in Energy Savings | Comments Off

Pipe Inspection Camera: When to Use One in Sloan

Wednesday, August 10th, 2011

For plumbers today, pipe inspection cameras are a huge aide, including Sloan. In the past, it was often very difficult to determine the location of a blockage or a leak, or indeed if one even existed at all. But now with this great modern equipment, it is much easier to get a thorough picture of the exact state of a pipe system and the nature of a potential problem.

These types of inspection cameras are especially useful when a clog is located underground or when an underground leak is suspected. Many types of plumbing problems can have multiple possible causes. But with pipeline inspection cameras, you can know for sure quickly exactly what type of problem you are dealing with.

For instance, even if you know that an underground pipe is leaking, it can be next to impossible to figure out exactly where the leak is. But to fix the leak you will have to unearth the damaged section of pipe and repair it. If you cannot pinpoint the leak precisely, you will be forced to unearth a large section of pipe. This takes a long time and causes unnecessary, although hopefully temporary damage to your yard as well.

However, if you can determine exactly where the leak is, you can dig up only the affected portion of pipe. This saves a lot of time and labor and it also means that you can limit the disruption the work causes in your yard. And the best way to find a leak like this is to use a pipe inspection camera to get a look at the inside of the pipe before you ever begin digging.

You do not need to wait for an emergency situation to develop to make use of a pipe inspection camera either. This technology is also extremely useful during annual drainage and sewer maintenance visits to help ensure that there are no unnoticed problems lurking below the surface. It is perfectly possible that one of your pipes is getting close to cracking but has not done so yet. The repairs can be a lot simpler if you catch this type of problem early, and that is exactly what a pipe inspection camera makes possible.

Pipe inspection cameras are also useful during maintenance visits because they allow technicians to determine which parts of your system need the most work. They can see where the larger buildups are and get the job done quicker overall than they could if they were operating blind.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Water-Saving Tips and Tricks From Spanish Trails

Monday, August 1st, 2011

Here are some of our favorite water-saving tips from Spanish trails. They are easy to incorporate into your lifestyle – and can save you hundreds or even thousands of gallons of water a year.

Whole House

  • Check for leaks – you may save thousands of gallons a month! You can find leaks by looking, listening, and monitoring your water bill for unusually high usage. To check for toilet leaks, put food coloring in your tank. If it gets into the bowl without flushing, you have a leak. Don’t forget to look for leaks in your outdoor plumbing too.
  • Know where your master water shut-off valve is located. In the event of a major problem, you’ll save thousands of gallons of water – and maybe your possessions as well.

Outdoors

  • Adjust your sprinklers so that you water only your lawn – not your sidewalk or driveway.
  • Consider adding a patio or “outdoor room” to your home. You’ll have less lawn to water and will add thousands of dollars to your home’s value.
  • Do two chores at once – water the grass by washing your car or your pet on the lawn. Be sure to use natural, biodegradable soaps.
  • Have your plumber re-route your laundry waste water to your lawn (check with local authorities first to be sure this is legal in your town).

In the Bathroom

  • Turn off faucets when you’re not actively using water – such as when you’re lathering your hands, shaving, or brushing your teeth. You’ll save hundreds of gallons each month. New touchless water faucets (or very affordable converters for your existing faucet) make this easy and fun to do, especially for kids.
  • Shorten your shower by only a minute or two, and save 150 gallons of water a month. (You can do this by turning off the shower while you lather your hair.)
  • Replace your old showerhead with a new WaterSense water-saving showerhead. They’re inexpensive and easy to install. You’ll save up to 750 gallons a month (and it’s a great opportunity to get a nice style upgrade too!).
  • Install WaterSense-certified aerators on all your faucets – another inexpensive upgrade that can save hundreds of gallons a month.
  • Insulate hot water pipes so don’t have to run the water as long while you wait for it to heat up.
  • Plug the tub before turning the water on for your bath, then adjust the temperature as the tub fills up.
  • Keep a bucket in the shower to catch water as it heats up. Use this water to flush toilets or water plants.

In the Kitchen and Laundry Room

  • Install a tankless water heater near your kitchen sink so you don’t have to run the water while it warms up.
  • If your dishwasher is new, scrape off excess food, but don’t pre-rinse. Modern dishwashers are built to handle un-rinsed items.
  • Upgrade your old water-cooled refrigerator, air conditioner, or ice-maker to a new air-cooled model for a significant reduction in water use
  • When buying new appliances, look for the EnergyStar label, which guarantees high efficiency. Also, look for models that offer cycle and load size adjustments.
  • Run your dishwasher and clothes washer only when they are full – you can save up to 1,000 gallons a month.

Tags: , , , ,
Posted in Energy Savings | Comments Off

Plumbing Noises: Different Kinds, Where They Come From and Why They Occur

Wednesday, July 13th, 2011

Under ideal conditions, you would hear nothing from your plumbing system except the sound of running water when you turn on the tap. Unfortunately, that is not always what actually happens. In fact, your plumbing can make all types of funny and sometimes alarming noises for no reason that you can easily discern.

For instance, one common plumbing noise sounds like a hard knock or hammer blow. This usually occurs when you turn off a tap and can be rather alarming. Sometimes you can even feel the reverberation of the impact that caused the sound. But why is this happening? Usually, this “water hammer” noise is the result of the dramatic shift in pressure in the system when you suddenly stop the flow of water from a faucet.

This sudden stop creates a kind of shock wave, which then travels back through the pipes and causes the loud knocking sound that you hear. This is easily fixed with a device that is known as a water hammer arrester. These devices help to dissipate the force of the pressure shift and can keep the noise from occurring at all.

There are also all kinds of whistling, squealing and squeaking noises that your plumbing can make under certain circumstances. These types of sounds are often caused by a worn out washer somewhere along the line that is having trouble regulating the flow of water. It can be a little difficult to pin down the source of these noises sometimes, especially if they occur no matter which faucet is turned on. But with a little hunting and trial and error you can usually track down the source.

Rattling sounds are also common and generally occur when your water pipes are not well secured to a rigid surface. If this is the case, the force of the water running through the pipes can cause the pipe to vibrate, creating the sound you hear as it bangs against whatever solid surface is nearby. For problems like this, simply securing the pipes in place better can put an end to all of your rattling issues.

Tags: , , ,
Posted in Plumbing | Comments Off

How a Water Softener Works

Monday, June 20th, 2011

You use water for many things. It is necessary for bathing, cooking, washing clothes and for drinking. But the water we use in our homes is not pure. It has plenty of other minerals and additives suspended inside. While some of these, like fluoride, are intentionally added to the water supplies in certain areas, some others get in by chance.

Aside from actual pollutants, the additives you may be the most concerned about finding in your water are calcium and magnesium. These minerals are picked up by water as it moves through the ground, and the more of them that get into your home water supply, the harder that water will be.

The term hard water is used to describe water with high levels of calcium and magnesium present. These minerals are not actually dangerous to us, but they can cause all sorts of problems for your indoor plumbing and other household systems. For instance, hard water will leave deposits of these minerals on the insides of pipes and on sinks, faucets and bathtubs.

Residue will also build up in appliances like coffee makers, dish washers and washing machines. Over time these buildups can become a real problem and you may have to pay for costly repairs or need to replace large appliances.

In order to avoid these types of complications, your best bet is to have a water softener installed. These systems can be connected directly to your home water source and they are able to remove excess calcium and magnesium from the water before it ever reaches any of your indoor plumbing or appliances.

Water softeners generally remove these minerals by attracting the positively charged calcium and magnesium particles with a tank full of negatively charged polystyrene particles. In this system, the calcium and magnesium are replaced by sodium ions as they move through the water softener, thereby maintaining the overall balanced composition of the water. Once the water has passed through and the calcium and magnesium have been left behind, the water softener will flush them out and prepare to absorb another wave of hard water minerals.

Tags: , , , ,
Posted in Plumbing | Comments Off

Signs of a Broken Water Line outside the House

Monday, May 30th, 2011

If you have a leaky pipe inside the house, chances are you will notice it pretty quickly. Water seeping through the walls or the ceiling is a good indication that something is wrong and it is a hard thing to ignore. However, if there is a leak in your pipes outside of your home, it can be a bit harder to detect. Fortunately, there are some things you can keep an eye out for that will alert you if this does become a problem.

One of the first places to look for signs of a leak outside your home is your water bill. While your bill may not be exactly the same every month, chances are that it generally stays within a certain range. And if you use a ton of water one month for some reason, you will probably be aware of it. But if your water bill suddenly goes up for no reason that you can discern, there is reason to suspect that a leaky pipe somewhere is the culprit.

Keep in mind that unexplained puddles in your yard can also be an indication that a pipe underground is leaking. If you notice something like this, it is a good idea to call a professional plumber right away. Fixing underground pipe leaks is a challenging chore and requires special equipment that you most likely do not have lying around your home.

There are several reasons that leaks in your outdoor pipes can develop. For one thing, the pipes may be old or they may have been defective to begin with. Improper installation or shoddy workmanship can all lead to problems later on. As frustrating as it is, there is very little you can do except have the leaky pipes fixed.

Another possibility is that extreme temperatures have been damaging the pipes over time. Particularly if you live in an area with harsh winters, it is very possible that your pipes have frozen or come close to it from time to time. This constant exposure to freezing temperatures will take its toll even on the highest-quality pipes and eventually they will need to be replaced.

No matter what caused the problem, though, or how you realize that it exists, it is important to get leaky outdoor pipes fixed right away. The problem will only continue to get worse if you do not act.

Tags: , , ,
Posted in Plumbing | Comments Off

How Can I Get Better Flow from My Faucets?

Friday, May 13th, 2011

Most of us realize that a drain can get clogged or that the pipes in our home might require extra repairs every now and then, but rarely do we realize that when the faucet is not providing a strong, steady flow of water, it is likely because of a clog in the actual faucet. If you are suffering from low flow in your faucets or worse, sputtering and clogging, here are some tips to help fix the problem.

Why it Happens

The reason that so many faucets now have problems related to clogging is that they have been changed and redesigned over the years to reduce water flow. Older faucets would pour ridiculous amounts of water through the drain – not at all good for the environment. Today, aerators and other technology advancements greatly reduce the amount of water used, but also tend to cause these types of clogs.

Checking Your Aerator

The easiest way to fix a slow flowing faucet is to check the aerator tip for unwanted sediment. Despite filtration of tap water, over time small bits of sand, dirt, and other sediment can and will build up in the aerator. That sediment should be cleaned out of the tip of the aerator at least once a month to keep it from slowing the flow of water.

If a water main breaks somewhere or a problem occurs in the water supply outside of your home, this type of sediment might start to build up more rapidly and cause immediate clogs in your faucet. Other things that might build up include pieces of pipe or flux from plumbing joints that break free and enter the water supply. None of it poses a health problem, but it can be frustrating when it gets into your faucets and blocks the water supply.

Valve Cartridge

If the aerator is not the problem it may be in the valve cartridge. To fix this, you will need to replace the part. Each faucet can be very different, so you should refer to your owner’s manual (many of which are online) for how to take this part out of the faucet assembly. When you go to the hardware store, be sure to take the valve cartridge with you so you can get the exact piece you need for replacement.

The easiest way to avoid a clog in your faucets is to be careful with any repairs you make. While a water main break is not something you can control, you can control how the water supply is affected when someone does repairs on your home’s plumbing. Leave faucets open outside, turn the main valve back on slowly and check your faucet immediately after the repair to ensure no sediment gets clogged in the assembly.

Tags:
Posted in Plumbing | Comments Off