Posts Tagged ‘Anthem’

« Older Entries

Things You CAN do Yourself Around Your MacDonald Ranch Home

Wednesday, February 8th, 2012

If you own a home, there are a lot of fun ways you can stay on top of regular maintenance without spending hundreds or thousands of dollars to hire a contractor. Sure, there are some tasks only a contractor should perform, but there are plenty of others you can take care of with a little spare time on the weekend.

  • Fixing Leaks – Unless it’s in a main water line or in your sewer, you can usually fix a leak or clog in your pipes by yourself. Replacing a faucet, snaking a line, or taking apart a fixture should still be done with the help of manufacturer’s guidelines, but as long as you turn the water supply off correctly, you should be okay taking things apart and making quick repairs.
  • Yard Installations – Short of digging it up (always have it checked for gas and electricity lines), you can do pretty much anything on your own in the yard. This includes composting, landscaping, adding a barbeque pit or upgrading your back porch.
  • Painting – Feel free to paint anything in or around your home without the help of a pro. Just make sure to use proper ventilation and to ensure that you remove any old paint carefully. If you’re not sure about the age of your paint, it should be tested for lead before you chip it clean, especially if you have children.
  • Replace Appliances – Old appliances can be removed and replaced relatively easily as long as you have someone to help you get rid of the old ones. Also, if you have a gas stove or other appliances that run on gas, always have them checked by a professional. Never unplug gas lines without someone there to ensure the gas supply to your home is off.
  • Tiling – Tiling is something anyone can do, but make sure you’re ready for the time commitment. Especially if you plan on putting tiles on a wall, it’s easy to make a mistake and ruin good tiles or good walls. Also, proper sealing around water fixtures like a bathtub or sink is vital. If you’re not sure, call a plumber to help.

There are a lot of ways you can have fun and fix up your house without paying for a professional’s help. But, remember not to take on jobs that are too much for you. If you aren’t sure how to complete a task or you want a second opinion, never be afraid to call Yes! Plumbing for some help. Even if they just check your work, it will save you money and you get the satisfaction of having done the work yourself.

Tags: , ,
Posted in drain and sewer maintenance, Plumbing, water line | Comments Off

Sun City Anthem Plumbing Repair Tip: Warning Signs of Leaking or Broken Pipes

Wednesday, January 18th, 2012

The plumbing system in your Sun City Anthem home consists of an extensive network of pipes and fixtures that can wear down over time, even if they are well-maintained. Your pipes should be inspected at least once a year, particularly in older homes.

Some broken or leaky pipes can be repaired easily, but you may need to replace your pipes. If you have any questions or concerns about your plumbing system, call Yes! Air Conditioning & Plumbing to speak with one of our certified plumbers.

Here are some warning signs of hidden leaks and broken pipes:

Abnormally High Water Bills

Unusual hikes in your water bill could indicate a leak, from broken or corroded pipes.  You should monitor your water bills to help you keep track of abnormal price increases.

Water Pressure

If you notice any sudden drops in water pressure, or if your washing machine or dishwasher takes longer to run through cycles, you could have a large leak in your pipe system. Call a plumber if it continues to be a problem.

Water Discoloration

While it could be sediment or mineral buildup getting through the municipal filtration system, water that contains red flakes or has a bitter taste could potentially indicate corrosion. You should call a professional plumber if this happens. Not only is it a health hazard, but you may need a pipe replacement.

Cast Iron Pipes in Older Homes

If you buy an older home with iron pipes, you should have them inspected by a certified plumber. Home inspectors can give a preliminary inspection, but they are not equipped or trained to provide a comprehensive inspection. Because cast iron pipes are made of rougher material than PVC piping, cast iron pipes tend to get clogged more easily, so you could have a potential disaster on your hands.

A professional plumber can provide a video camera inspection of your pipes to make sure there are no major clogs, root penetration, or corrosion on the inside of the pipe. This is why a professional plumber should handle any of the plumbing repairs in your Sun City Anthem home.

Call Yes! Air Conditioning & Plumbing to handle all of your plumbing installation, repair, or maintenance needs.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Anthem Plumber’s Guide: How to Replace a Bathroom Vanity

Wednesday, January 11th, 2012

Because it looks something like a dresser combined with a kitchen counter, you may think of your Anthem home’s bathroom vanity as being a piece of furniture, and therefore that it is simple to replace. Well, there’s good news and bad news there.

The bad news is that because of the sinks and pipes involved, your vanity is part of your plumbing system, so it’s a little trickier than getting a new sofa.

The good news is that it is still something you can do on your own – or at least with a friend – in a few hours or so. After you have measured the space and purchased the new vanity, here is how you can go about replacing the old one:

  1. Shut off the water supply. This is always the first step when undertaking any sort of plumbing work. Put a bucket beneath the sink to catch any water that drips from the supply lines after you disconnect them.
  2. Using a putty or utility knife, loosen the caulk that is sealing the countertop. Gently remove the countertop.
  3. Detach the vanity from the wall. Most vanity units are screwed in place to the wall, so just spot and remove all the screws.
  4. Mark the studs in preparation for positioning the new vanity. Hint: the old one was already drilled into the studs, if it was done properly.
  5. Put the new vanity in place, making sure it is flush to the wall.
  6. Attach the new vanity to the wall, taking care to screw into the wall studs that you marked in step #4.
  7. Put a bead of caulk along the top of the vanity base to hold the countertop in place. Carefully set in the new countertop.
  8. Reconnect the plumbing that you disconnected as part of step #1.
  9. Put down a thin bead of caulk along the edges of the countertop below the lip. Smooth the caulk in place with a damp rag.

Now your new vanity is all set. Allow the caulk to dry before getting moisture near it, and don’t forget to turn the water supply back on! If you have any questions or need any help, talk to your Anthem plumber.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Anthem Plumber Tip: Plumbing Problems You Can’t Fix Yourself

Monday, December 26th, 2011

While there are some relatively simple plumbing jobs that most Anthem homeowners can handle with ease, there are some plumbing problems that have a significantly higher degree of difficulty.

For these trickier or more extensive jobs, you really need to call in an Anthem professional. What kinds of projects are we talking about here?

Take for example a simple clogged drain. Whether it’s your tub or your kitchen sink, you’ve certainly encountered a clog over the years. Sometimes they are simple and easy to deal with, so you decide to tackle it on your own. First, you pour some commercial chemical drain clearing product down the drain. You let it sit for a while, like the instructions say, then run the water.

No luck—the drain is still clogged.

So, you try a pipe snake. You thread it down into the drain and through the pipe until it hits the clog. Then you pull back and…nothing. So you try again and again, really jamming the snag down in there to make it engage the clog, until…it breaks.

Now you’ve got a clog and a broken pipe snake in there.

So, you try more drain cleaner, but of course it doesn’t work again, and now the harsh chemicals are taking a toll on your pipes. You decide to just take the length of pipe out so you can see the clog, then remove it. Soon, you find yourself in over your head and you’re not sure how to replace the pipe.

Yikes. That’s a mess.

This isn’t to say you should never attempt to a plumbing repair on your own. Sometimes they are simple enough that the DIY option is the cheapest and best. However, if your efforts are coming up short and you’re about to enter unfamiliar territory, call in a pro. It will save time, money and headaches in the long run.

Tags: , , , ,
Posted in Plumbing | Comments Off

Why You Might Need Video Inspection for Your Water or Sewer Line? A Guide from Mountains Edge

Friday, December 2nd, 2011

When you suspect a problem in your pipes, the first thing you should do is call a Mountains Edge plumber for an inspection. It could be as simple as a small crack that can be sealed easily or a clog from excess food and grease being put down the drain.

In the past, inspection was a hit or miss process. Using trial and error a plumber would attempt to determine the source of the problem. However, with modern trenchless technology and the low cost of video equipment, it is now possible to look inside the pipe and see what the problem is directly.

How Video Inspection Works

The process varies depending on the length of pipe that needs to be inspected. For instance, for a sewer line or water line, a small hole is dug to access the pipe. However, inside this may not be necessary depending on where your plumber suspects the problem originates.

That said, pipe inspection is most commonly needed for underground lines that cannot be accessed without some digging. Instead of digging up the pipe completely, a video line can be used to check for specific problems.

Once your plumber has access to the pipe line, they will insert the video inspection unit and check for things like roots, clogs, leaks, and cracks. This is such a powerful tool because instead of guessing where the problem is located and repairing based on those assumptions, your plumber can now be 100% sure of the problem and solve it accordingly.

Tags: , , , , ,
Posted in Plumbing | Comments Off

What is the Difference Between Water Filtration and Water Softening? A Question from Las Vegas

Monday, November 21st, 2011

If you’ve ever considered installing a water filtration system for your Las Vegas home, you probably ran across water softening and wondered how this is different than normal filtration. The two are similar in that they improve the quality of your water, protecting both you and your home’s plumbing system. However, filtration and softening are two very different things and you may not need both of them.

Water Softening

Water softening is a process designed to minimize the impact of hard water on your home’s plumbing. Hard water occurs when certain minerals like iron and magnesium are present in high levels in your water supply. The problem occurs when those mineral settle on your fixtures and pipes, leaving behind a residue that builds over time and can block the pipes or ruin the fixtures.

Hard water isn’t generally dangerous to your health, but if it is bad enough, it can result in poor tasting water and will cost you money as it does an increasing volume of damage to the system. To fix the problem, you soften the water with a chemical treatment that keeps the minerals from settling on their way through. They simply go straight through the pipes and fixtures and no damage is done.

Water Filtration

Filtration on the other hand is designed to remove key contaminants from your water – things like sediment, bacteria, mold, nitrates, and arsenic – things that can actually cause harm to you and your family if not properly treated.

While water filtration is not the same as water softening, the two often go hand in hand. Not only does water softening have the potential to add unsafe levels of sodium to your water (which then needs to be removed through filtration), but usually when water is hard, there are other contaminants as well that can cause harm if left unchecked.

The only way to be truly sure of which problem you have and which solutions are best is to have a full test of your water supply done. This will help you determine which of the many water cleaning solutions on the market will be best for your home.

Tags: , , , , ,
Posted in Plumbing | Comments Off

How to Shut Off Your Water Supply: A Guide from Mountains Edge

Monday, November 14th, 2011

In the case of a plumbing emergency, the last thing you want to do is watch as more water continues to pour into your Mountains Edge home through a burst pipe, broken appliance or busted water valve. So, the first step should always be to turn off your main water supply valve. Here are some tips for finding that valve and getting the water supply off as soon as possible.

Finding Your Main Water Supply Valve

The valve is almost always located the same place. It is usually in your garage between the inlet and the main water line. Once you find the main water supply valve, turn it off to immediately stop more water from entering your home. If you notice that water is continuing to enter your home, you have a problem before the entry valve and should call the city immediately because one of their pipes might have burst.

Shutting Off Individual Appliances

In many cases, the problem is related to a single appliance. If this is the case, you don’t necessarily need to turn off the entire water supply – just the supply valve for the specific appliance or fixture. Every major water fixture and appliance in your home should have its own shutoff valve in an easy to reach place. This goes for every sink, toilet, shower, dishwasher, and washing machine in your home – not having those valves can be dangerous.

Once you have turned off your water supply, it’s time to call a plumber. Make sure to keep track of everything you do (take notes if you can) and supply that information to the plumber both on the phone and when they arrive. It will help them diagnose and solve the problem much faster.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

Why Does My Sink Backup When I Run the Washing Machine? A Question from Summerlin

Wednesday, November 2nd, 2011

Every now and then something strange happens that is simultaneously baffling and frustrating in your Summerlin home. Gray water from your washing machine backing up into your sink is one such problem and for many homeowners it can be an ongoing source of annoyance.

Why does this happen? To start with, know that your sink and washing machine drain lines tend to run congruent to each other. This means they combine at some point on the way to the main sewer line. So, if there is a problem after they combine, it can affect both systems.

How to Fix the Problem

First, you must pinpoint the problem. More often than not, a washing machine backup will occur in one or more sinks during or after the drain cycle of your washing machine. This may not happen every time or it may get progressively worse. It depends on why it is happening in the first place.

If the sink doesn’t back up on its own when you do the dishes or run the faucet, the clog is probably deeper in the pipes and only responds to the large volume of water being drained from your washing machine. In either case, you probably have a clog in the drainage pipe after the two combine.

Do NOT use any chemicals to clear the clog. Not only do chemicals cause damage to your pipes, which can lead to cracks and leaks later, they are not always effective at actually removing the problem – they simply minimize it in the short term.

To solve the problem, you’ll either need to plunge the sink and hopefully clear out the clog or have someone snake the line to pull the clog out of the drain pipe. If you cannot clear it on your own, it may be a good time to call a plumber for a more in-depth attempt to fix the problem.

Tags: , , , , ,
Posted in Plumbing | Comments Off

What Makes A Home Healthy? A Guide from Anthem

Monday, October 17th, 2011

The world we live in is full of toxins, pathogens and other potential health hazards. It’s unfortunate, but it is a fact of life. You may think of your Anthem home as a sanctuary from the outside world, but hazards exist can find their way in there. By taking some simple precautions, however, you can maintain a healthy home environment for yourself and your family.

Breathe Easier

Air quality is an important factor in good health, and just because you close the door behind you when you come home does not mean potentially contaminated air can’t creep into the house. Here are some tips to help you breathe easier:

  • Inspect your home’s ventilation system every spring to ensure it is good repair. Change the filter annually and keep the vents clean.
  • Install carbon monoxide detectors around your home, especially near appliances and fireplaces.
  • Do not smoke and do not allow others to smoke inside.

Hydrate Safely

Depending on where you live, your water supply may be at risk for a number of different contaminants. Being aware of the risks that exist in your local area is important, as is taking steps to keep the water you drink clean and healthy. Some examples include:

  • If you have lead pipes in your home, have them replaced. Lead is a neurotoxin that can build up and poison you over time.
  • Use a water treatment system to cleanse your water of chlorine, heavy metals, nitrates, and other potential contaminants that may have run into the local water table.

Keep It Clean

Finally, the most basic way to ensure you have a healthy home is to practice good hygiene and cleaning habits:

  • Disinfect bathroom and kitchen surfaces to prevent bacterial growth.
  • Vacuum regularly to prevent dust and allergen buildup.
  • Wash dishes and utensils after use, especially after contact with raw food.
  • Wash linens weekly in hot water to kill microbes and prevent the spread of disease.
  • As always, the most important of all: wash your hands, and encourage children to do the same.

Simple, careful practices like these will make a positive impact on your health and that of your family.

Tags: , , , , ,
Posted in Plumbing | Comments Off

How to Clean Water Spots from a Shower Door: A Guide From Anthem

Wednesday, October 12th, 2011

The relationship between the water and the shower in your Anthem home is a little paradoxical. You use the water in the shower to keep yourself clean, and you can use water to keep your shower (and everything else!) clean, but if left unchecked, the water itself will leave your shower dirty and spotty.

Those spots left on your shower door are mineral deposits from water that has evaporated, leaving its mineral passengers behind. They are especially problematic in areas with harder water. Here is how you can get rid of them.

The Natural Way

It may surprise you to know that with all the chemicals available on the market for cleaning the bathroom, the best remedies for hard water are actually natural ones: lemon juice and vinegar. They are both acidic, so they can dissolve the mineral deposits, and they rinse away clean.

To use lemon juice (or a lemon), apply it to a damp sponge and wipe the door. You can also squirt the lemon juice directly on the door and wipe it with a sponge. Use this technique and let the lemon juice soak in a bit for tougher stains. Your shower will not only be clean, but it will smell like lemons.

Although it doesn’t smell as nice as lemon juice, vinegar also works well. Don’t forget the cleaning power of vinegar and baking soda, which generates a powerful chemical reaction that helps break up tough stains. For water spots, mix up a paste of vinegar and baking soda. Use a small brush, like an old toothbrush, to spread the paste around the edges of the shower door and on any tough stains. Wipe it clean with a damp sponge.

You can also use vinegar or lemon juice weekly to keep tough deposits from building up.

Other Ideas

There are some other methods you can use if the spots are really stubborn. CLR, for example, can break up very stubborn mineral deposits, but it is also toxic, so use it sparingly. Daily shower cleaner sprays work well to stop water spots from forming if used regularly. And if you think you have too much sediment in you water, look into a water treatment system.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

« Older Entries